RailGuard 200 Guardrail System

RailGuard 200 Safety Guardrail System           

The original non-penetrating rail system that exceeds requirements for OSHA temporary and permanent guard-rail standards.

Ideal for creating leading edge rooftop fall prevention or for defining material landing zones during active work on the jobsite.

• Standard yellow powdercoat rails and galvanized base.
• Custom colors available.
• Base allows multiple rail angles.
• Non-Penetrating design.
• Integrated toe-board pockets and handles

RailGuard 200 Safety Guardrail System Specifications:

Meets OSHA 1910.23(c) and 1926.502 (b)              

Base Plate
Mounts up to four rail sections
Allows 90° or 45° turns
Narrow 3-1/4” space between rails
90 lbs.

Rail Sections:
Top Rail Height = 42” tall
Mid-Rail Height = 20” tall
Three standard lengths: 10’, 7’ 6”, 5’
Custom sizes available
Standard rail section 16 ga. welded steel
Fit-rite rail = 1.25” schedule 40 pipe cut to length

Usage Recommendations:

1. End all configurations with either a closed loop that connects all bases
and rail sections, or the use of a 5 foot Outrigger System to provide
the needed counterbalance.
2.Outrigger Systems can be ordered above and include one additional base, one 5 ft rail and one pin.
3. Locking pins must be used to secure all rails into the bases.
4. Use toe boards when there is a danger of materials falling. Order adjustable Short Speed board for 4' and 5 ft rails, Medium for 5' to 7.5" and Long for 7' to 10ft. rails

RailGuard 200 has been deemed OSHA compliant by  an independent certified Safety Engineering firm. Test results available upon request.